Hot Spring Spa Parts

Jed 103 Ozone Replacement

JED 103 CORONA DISCHARGE OZONATOR. The JED 103 is a CD or "corona discharge" type ozone generator designed for water purification for hot springs, tiger river spas. It is typically installed in conjunction with a venturi injector or dedicated air jet. -Specifications- Ozone output: 0.1 grams per hour Input voltage 120 VAC, 60 Hz (240 VAC, 60Hz units are special order marked accordingly) Operating current - 0.25 Amperes Power consumption - 30 Watts

It is ideal for spas 350 gallons or smaller. Ozone System comes with air tubing,air check valve, and plug to go in hotspring spas 1995 to current

Jed 1003 Ozone replacement

The JED 1003 is a CD or "corona discharge" type ozone generator designed

for water purification For Hot SPring Spas. It is typically installed in conjunction with

a venturi injector, bypass adapter, or dedicated air jet. I

n smaller, portable hot tubs, it should be used with an adequate contact or mixing chamber.
-Specifications-
Ozone output: 0.2 grams per hour
Input voltage 120 VAC, 60 Hz (240V units are marked accordingly)
Operating current - 0.5 Amperes
Power consumption - 60 Watts

It is ideal for spas 350 gallons or Larger. Ozone System comes with air tubing,air check valve, and plug to go in hotspring spas 1995 to current

72602 Freshwater III Ozone System

Conora Discharge Unit for all Hot Spring Spas 1995- Current

Ozonators enhance the quality of the spa water when it is used to supplement the spa owner's regular water maintenance program.

The FreshWater III ozonator is mounted within the spa equipment compartment and plugged directly into the control box. The control box contains a special ozone receptacle designed to power the ozonator.

The Fresh Water III ozonator can only be mounted on spas manufactured in 1995 and after. The ozone interface cable will only work with IQ2020 control boxes, however, hook-up of the interface cable is not required in order to run the ozonator.

Ozone Check Valve

part # 1044101

Over time the ozonator check valves can break down causeing backflow of water and not creating bubbles (the ozone injection process)

This check valve is a replacement for all Hot Spring Tiger River Spas.

replaces #34658 3/16" valves

Ozone Injector 3/4"

Part # 74078

The injector fits in-line after the Silentflo 5000 (discharge side and after the heater). This Kynar Ozonator by Watkins manufacturing. An injector creates a vacuum (venturi effect) as water passes through it to enabling ozone gas to enter the low flow plumbing of a Hot Spring or Tiger River spa in a pre-determined measure.